中文
English

Boil Resistance/Alcohol Rub Resistance/Multi-substrate Adhesion/Low Hydroxy Acrylic Secondary Disper

After decades of rapid development, my country's plastic products industry has undergone tremendous changes. Especially in recent years, the production and sales volume of my country's plastic products industry ranks first in the world, of which the output of plastic products accounts for about 20% of the world's total output


It is understood that most of the protective decorative coatings for plastic products on the market are mostly solvent-based, and with the tightening of environmental regulations, solvent-based plastic protective coatings have been difficult to meet the international regulations that are harmful to exported plastic products. The requirement of material limit, especially for products with a large market share such as mobile phones, home appliance casings, and electrical parts, urgently requires environmentally friendly and safe water-based coatings.


To this end, Guangdong Huaguoshan Environmental Protection Technology Co., Ltd. combines new technologies, new industries and new formats to seek new breakthroughs in the dimensions of in-process products, raw materials, and additives, and has developed a product with excellent adhesion on a variety of substrates. Low Hydroxy Acrylic Acid Secondary Dispersion


- Houxian® 5117S.


Houxian® 5117S

Adhesion testing on different substrates


(Test process: topcoat spraying, flash dry for 15min, bake at 70℃ for 30min, overnight test, the same for the following test)


1.png

2.png


Adhesion comparison: Under the same curing conditions, Houxian®5117S has better adhesion on plastic plates than competing products, and it can be used on various substrates such as PS plates, electrophoretic plates, tinplate (polished/non-polished), and galvanized plates. The upper adhesion is grade 0.



Houxian® 5117S

Outstanding resistance to boiling water and alcohol rubbing



Adhesion resistance comparison test after boiling: Under the same curing conditions, Houxian®5117S can withstand boiling at 80°C for 2 hours on a plastic board, and can achieve no foaming or whitening, and the adhesion of the boiled part is grade 0.


8.png


Comparison of alcohol rub resistance: Under the same curing conditions, Houxian®5117S has no obvious scratches on the plastic plate when it is resistant to alcohol rubbing for >50 times, while the competing products have obvious scratches when it is resistant to alcohol rubbing on the plastic plate for 50 times. fade.


*Note: Alcohol wiping test: Dip a clean cloth with anhydrous alcohol (concentration ≥99.5%), wrap it on a special test head (the area of the test head is 1c㎡ after wrapping the clean cloth), and apply a load of 500g. Use a special instrument to wipe the sample surface back and forth at a speed of 40 times/min to 50 times/min and a stroke of about 40cm, and the paint film surface is qualified when there is no obvious fading and no bottom penetration (through the substrate).



Houxian® 5117S

Clear texture and strong stereoscopic effect

Houxian®5117S can be used as orange paint, hammer paint and silver powder paint. It can achieve clear texture, strong three-dimensional effect and good decorative performance. It also has the advantages of fast drying, strong adhesion, good hardness and good mechanical properties.

image.png



Houxian® 5117S

High gloss and fullness


17.png

Comparison of board surface effects: Under the same spraying process and maintenance conditions, Houxian®5117S board surface has higher gloss and better fullness.



Houxian® 5117S

Emulsion parameters


18.png


*注:索取样品或推荐配方,请联系相关业务人员。

工业树脂联系方式.jpg


share
Next:This is the last one
Prev:This is the first article